10
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
© Copyright Polaris Inc.
10.35
IMPORTANT
Ensure the sealing caps are flush with the battery.
NOTICE
Maximum battery performance and longevity depends
on following the rest and charging activation steps.
7. Allow battery to stand for 1-2 hours. This allows the
electrolyte to permeate the plates for optimal
performance.
8. Charge the battery for 1 hour using a Polaris
recommended charger. Polaris recommends using
battery charger (PN 2830438), Battery MINDer 2012.
NOTICE
Reference the recommended charging information on
the battery decal. Battery charger must be designed to
work with AGM batteries. Internal damage may occur if
a non-AGM compliant battery charger is used or if too
much current is applied during charging.
NOTICE
Battery voltage may reach more than 16 volts during
initial charging session.
9. Allow battery to stand for 1-2 hours before checking
voltage.
10.Check open circuit voltage. Continue charging as
needed.
Battery Open Circuit Voltage:
12.6 Volts
BATTERY / ELECTRICAL
To Next Page
Loading...
Need help?
General
