48
OPERATION
Brake System Break-in
Apply only moderate braking force for the first 50 stops. Aggressive or
overly forceful braking when the brake system is new could damage
brake shoes and drums.
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condi-
tion before operating increases the risk of an accident. Always inspect
the vehicle before each use to make sure it's in safe operating condition.
Item Remarks Page
Batteries Ensure batteries are fully charged 52
Brake system Ensure proper operation 42
72
Steering Ensure free operation 72
Tires Inspect condition and pressure 74
Wheels/fasteners Inspect, ensure fastener tightness 75
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Accelerator Ensure proper operation 43
Indicator lights/switches Ensure proper operation 35-40
Headlamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
78
Seat Belts
(if so equipped)
Check length of belt for damage,
check latches for proper operation
46
To Next Page
Loading...
Need help?
General
