50
OPERATION
New Operator Driving Procedures
Stopping
1. Release the accelerator pedal completely.
2. Depress the brake pedal and brake to a complete stop.
Parking
1. Stop the vehicle on a level surface.
2. Engage the park brake.
Tip: A roll-away alert will sound if the vehicle begins to roll away after being
parked. Return to the vehicle immediately and make sure the park brake is
engaged.
3. If the vehicle will be parked for more than a few minutes, turn the
key off. Remove the key and move the direction selector switch to
the neutral position.
4. Any time the vehicle will be parked for more than a few hours,
move the Master On/Off switch to the OFF position and follow the
recommended storage procedures. See page 64.
To Next Page
Loading...
Need help?
General
