Polaris DP-20 Quick Start Manual

POLARIS DP-20
WEB GUIDE CONTROLLER
QUICK START SETUP MANUAL
04/14/2008 Page 1 of 6 Figure Sheet 2-248
FEATURES
POLARIS DP-20 GENERAL INFORMATION
The instructions contained in this Quick Start Setup Manual are written to support operation of the Polaris
DP-20 Web Guide Controller User Manual. For further assistance contact Fife Technical Support at
1-800-333-FIFE (1-800-333-3433).
DISPLAY DEFINITIONS
The Polaris DP-20 display is divided into 4 rows of information and a brief description is listed below.
Refer to Figure 1 for the LCD display and keypad button locations, and the DP-20 Web Guide Controller
User Manual, Figure Sheet 1-862 for complete display definitions.
1. The first line contains the Menu number and shows current sensor selection. May also indicate
password protection and Digital I/O.
2. The second line of the display shows the current Operation Mode or Setup Menu selected.
3. The third line will indicate Automatic, Manual or Servo-Center sensor mode; along with displaying a
bargraph indicating the signal level of the currently selected sensor mode. This line also displays the
title of the current Setup Menu.
4. The fourth line can show the Guide Point value, ASC Control, and ASC Limits.
Figure 1.
POLARIS DP-20 DISPLAY
1A
AUTOMATIC
× -ãããããÜÜÜÜÜ+

Polaris DP-20 Specifications

General

Brand	Polaris
Model	DP-20
Category	Controller
Language	English