89
MAINTENANCE
Removal from Storage
1. Charge the battery if necessary. Install it in the vehicle.
2. Make sure the spark plug is tight.
3. Fill the fuel tank with fuel.
4. Check all the points listed in the Daily Pre-Ride Inspection section on page 38. Tightness
of the bolts, nuts and other fasteners should be checked by an authorized POLARIS
dealer or other qualified service facility.
5. Lubricate at the intervals outlined in the Periodic Maintenance Chart beginning on page
59.
Transporting the GENERAL
Follow these procedures when transporting the vehicle.
1. Place the transmission in PARK.
2. Stop the engine.
3. Slowly release the brake pedal and make sure the transmission is in PARK before exiting
the vehicle.
4. Secure the fuel cap, hood, doors (if equipped) and cargo box. Ensure that the seats are
attached correctly and are not loose.
WARNING! Cargo and other loose vehicle parts may fly off while transporting this vehicle. Secure or
remove all cargo, and inspect the unit for loose parts prior to transport.
5. Always tie the frame of the POLARIS vehicle to the transporting unit securely with
suitable straps or rope. Do not attach tie straps to the front A-arm bolt pockets.
6. Remove the key to prevent loss during transporting.
To Next Page
Loading...
Need help?
General
