BRAKE INSPECTION
WARNING
Do not apply WD-40® or any petroleum product to brake discs. These types of
products are flammable and may also reduce the friction between the brake
pad and caliper.
1. Check the brake system for fluid leaks.
2. Check the brake pedal for excessive
travel or a spongy feel.
3. Check the friction pads for wear, damage
and looseness.
4. Check brake discs for signs of cracks,
excessive corrosion, warping or other
damage. Clean any grease using an
approved brake cleaner or alcohol.
5. Inspect the brake disc spline and pad
wear surface for excessive wear. Change
pads when worn to 0.030" (0.762 mm).
90
MAINTENANCE
To Next Page
Loading...
Need help?
General
