35
FEATURES AND CONTRO LS
Electrical Switches
3. Engine Stop Switch - The engine will not start
orrunwhentheswitchisintheOFF position. Its
purpose i s to provide the operator with a quick
means of engine shutdown i n case of an emergency.
To stop the engine, slide the stop switch either right
or left to the OFF position.
4. Main Switch - To start the engine, slide the stop switch to t he
center RUN position and turn the main key switch clockwise past the
ON position. Release the key when the engine starts.
NOTE: Turn off the main switch to end all electrical power to the
vehicle, including the cooling fan and lights.
5. All Wheel Drive Switch (AWD Models) Select AWD models do
not have an AWD switch. These models are continuously in AWD.
3
To Next Page
Loading...
