42
FEATURES AND CONTRO LS
Automatic Transmission Gear Selector
The transmission gear selector (1) is located on the right side of the
vehicle.
H: High Gear
N: Neutral
L: Low Gear
R: Reverse
P: Park
To shift into HIGH or PARK,
you must first apply t he
auxiliary brake t o activate the
high/park lock-out mechanism.
When shifting out of HIGH or PARK, it’s not necessary to apply the
brake.
CAUTION
Shifting gears with the engine speed above idle or while the
vehicle is moving could cause transmission damage.
To change gears, stop the vehicle, and with the engine idling,
move the lever to the desired gear. Apply the auxiliary brake if
shifting into HIGH or PARK.
Whenever the ATV is left unattended, always place the transmission in
PARK and l ock the parking brake.
Belt Life
To exte nd belt life, use low forwa r d gear in hea vy pulling situations and
whe n operating at less tha n seven miles per hour for exte nded per iods of
time . If towing the vehicle is necessary, shift the transmission into
neutral for better m obility and to prevent damage to the belt.
1
H
N
P
L
R
To Next Page
Loading...
