Polaris Mazda BT-50 RW-50/15 - Step 6 - Prepare the BT50 RW-50;15 OEM Fascia

1. Grab the OEM fascia and
remove all 9 clips and set aside.
2. Remove the 10 screws holding the
button panel and air conditioning
vents in place - set aside.
Step 6 - Prepare the BT50 RW-50/15 OEM fascia
10
3. Position the button panel and air condi-
tioning vents onto the RW-50/15 fascia
and secure in place with the 10 original
screws.
4. Clip the 9 clips onto the RW-50/15
fascia
5. Use the 2 screws to attach the
RW50/15 screen to the fascia.
IMPORTANT: When installing any screws into the RW50/15 fascia, be sure not to overtighten.
We r
ecommend using a screwdriver and not a drill because it can create a hairline crack that
will deteriorate over time causing the fascia to crack.
6. Finished product.
BT50-Installation-Guide-V3 (2020) 10/03/20 3:14 pm Page 10