VEHICLE
From the Vehicle tab you can do the following:
• Access vehicle
diagnostics
• GPS Status
• Set fuel type
• Customize heated grip
temperatures
PIN ACTIVATED SECURITY SYSTEM (P.A.S.S.)
(IF EQUIPPED)
NOTICE
The P.A.S.S. feature must be activated by your dealer using Polaris Digital
Wrench. See your dealer for setup and activation.
Snowmobiles equipped with a 7S display have the ability to lock the snowmobile
into a low power mode until a security passcode is entered. Locking the
snowmobile using the Lock Vehicle button will limit the vehicle’s RPM so the
vehicle will remain motionless.
NOTICE
The vehicle can be locked only when the engine is running and the vehicle is
not in motion. If the engine is OFF, the Lock Vehicle button will be disabled.
CHANGING YOUR PASSCODE
The default passcode is available at the time of vehicle purchase. Changing the
passcode will always require the old passcode. To change the security
passcode, do the following:
1. Go the Settings menu by pressing the Badge Panel button followed by the
All Settings button.
2. Select Vehicle Settings from the left toolbar.
3. Select Change Passcode.
4. Enter the existing/old passcode.
5. Enter the new passcode.
78
RIDE COMMAND DISPLAY
To Next Page
Loading...
Need help?
General
