109
MAINTENANCE AND LUBRICATION
Oil an d Filter Change
7. Place a drain pan beneath t he crankcase and remove the drain plug.
8. Allow the oil to drain completely.
9. Replace the sealing washer and reinstall the plug. Torque to 14 ft. l bs. (19 Nm).
10. Place shop towels beneath the oil filter.
11. Remove the three cover bolts and remove the
cover.
12. Pull out the oil filter. NOTE: A spring located
behind the filter m ay pop out as the filter is
removed. The spring must be reinstalled with the
new filter.
13. Using a clean dry cloth, clean the filter sealing
surfaces.
Step 12
To Next Page
Loading...
