55
FEATURES AND CONTROLS
Light Switches
The light switch is located on the left handlebar. It’s used to turn the lights on and off and
to switch the lights from HI to LO. NOTE: The lights won’t work unless the key is in the
ON position and the engine stop switch is i n the RUN position.
Operating the ATV on streets or roads, especially in darkness, could result in an
accident and serious injury or death.
Your ATV is not equipped with highway-approved lights. It’s designed for and must be
used for off-road use only. Use caution and drive at reduced speeds in conditions of
reduced visibility such as fog, rain and darkness.
WARNING
To Next Page
Loading...
