128
MAINTENANCE AND LUBRICATION
Spark Plugs
Spark Plug Removal and Replacement
3. Move the fuel valve hose clamp (1)
forward and gently remove the hose from
the fuel valve fitting on t he gas tank.
4. Remove the vent hose (2) from the
instrument panel, taking note of the hose
routing for reinstallation.
5. Remove the tank mounting bolt (3) at the
rear of the gas tank.
6. Move the tank rearward and upward over
the engine. Slowly remove the tank and
be careful not to catch any hoses, wires
or other components. Place the tank on a
stable surface or work bench. Be sure to protect the valve from contamination or
damage.
1
2
3
To Next Page
Loading...
Need help?
General
