143
ADJUSTMENTS
Brakes
1. Always maintain the brake fluid at an adequate level
(see page 60).
2. Check the brake system for fluid leaks.
3. Check the brakes for excessive travel or spongy feel.
4. Check the friction pads for wear, damage and looseness.
5. Check the security and surface condition of the disc.
6. Inspect the rear brake disc spline and pad wear surface for
excessive wear.
NOTE: Pads should be changed when worn to 3/64″ (.1 cm), or
about the thickness of a U. S. dime.
3/64″ (.1 cm)
To Next Page
Loading...
