4. Use a funnel and slowly add coolant as needed.
5. Reinstall the pressure cap. Use of a non-standard pressure cap will not allow
the recovery system to function properly. Your POLARIS dealer can provide
the correct replacement part.
OVERFLOW BOTTLE COOLANT LEVEL
Always check and change the coolant at the intervals outlined in the Periodic
Maintenance Chart. Maintain the coolant level between the minimum and
maximum marks on the bottle (when the fluid is cool).
1. Position the vehicle on a level
surface.
2. Lift the hood. View the coolant level
in the overflow bottle
w
.
3. If the coolant level is below the safe
operating range, lift the hood and
locate the overflow bottle lid.
Remove the cap and use a funnel to
add coolant through the filler
opening. Reinstall the cap.
TIP
If coolant must be added often, or if the overflow bottle runs completely dry,
there may be a leak in the system. Your dealer can inspect the cooling system.
102
MAINTENANCE
To Next Page
Loading...
Need help?
General
