MODE BUTTON
The button located on the face of the instrument cluster is used to toggle through
available mode options in the following order:
• Odometer
• Trip Meter
• Tachometer
• Hour Meter
• Service Interval
• Diagnostic Display Mode
• Engine Error Codes (if activated)
When the vehicle is restarted, the rider information center will still be displaying
the last mode you were using, rather than starting over at the odometer.
DISPLAY UNITS
The instrument cluster can be customized to display either standard or metric
units of measurement.
TIP
To exit set-up mode at any time, wait 10 seconds. The display automatically
exits and returns to the odometer display.
MEASUREMENT STANDARD METRIC
Distance Miles Kilometers
Fuel U.S. Gallons Liters, Imperial Gallons
Temperature Fahrenheit Celsius
Time 12-Hour Clock 24-Hour Clock
To change display units, do the following:
1. Turn key to OFF position.
2. PRESS and HOLD the Mode Button while turning key to the ON position.
3. The display will flash to the distance setting (mi / km), tap the Mode Button to
toggle between units.
4. PRESS and HOLD the Mode Button to save the setting and advance to the
next unit option.
5. Repeat procedure to change the subsequent unit settings.
48
FEATURES AND CONTROLS
To Next Page
Loading...
