BRAKE INSPECTION
WARNING
Do not apply WD-40 or any petroleum product to brake discs. These types of
products are flammable and may also reduce the friction between the brake
pad and caliper.
1. Check the brake system for fluid
leaks.
2. Check the brake pedal for
excessive travel or a spongy feel.
3. Check the friction pads for wear,
damage and looseness.
4. Check brake discs for signs of
cracks, excessive corrosion,
warping or other damage. Clean
any grease using an approved
brake cleaner or alcohol.
5. Inspect the brake disc spline and
pad wear surface
q
for excessive
wear. Change pads when worn to
0.030" (0.762 mm).
106
MAINTENANCE
To Next Page
Loading...
Need help?
General
