TIRES
WARNING
Operating your vehicle with worn tires will increase the possibility of skidding,
loss of control and an accident, which could result in serious injury or death.
Always replace tires when the tread depth measures 1/8” (3 mm) or less.
Improper tire inflation or the use of non-standard size or type of tires may
adversely affect vehicle handling, which could result in vehicle damage or
personal injury. Always maintain proper tire pressure. Always use POLARIS
approved size and type of tires for this vehicle when replacing tires.
AXLE AND WHEEL NUT TORQUE SPECIFICATIONS
Inspect the following items occasionally for tightness, and if they've been
loosened for maintenance service. Do not lubricate the stud or the lug nut.
Lug Nut
(Aluminum
Wheels)
Front and Rear
30 ft. lbs. (41
Nm) PLUS 1/4
TURN or 90
degrees
2-Piece Flange
Nut
(Steel Wheels)
Front and Rear
35 ft. lbs. (47
Nm)
Spindle Nut
Front
70 ft. lbs. (95
Nm)
Hub Retaining Nut
Rear
110 ft. lbs. (149
Nm)
Front
80 ft. lbs. (108.5
Nm)
109
MAINTENANCE
To Next Page
Loading...
Need help?
General
