MODE BUTTON
The yellow button located near the instrument cluster is used to toggle through
mode options available.
DISPLAY UNITS
The display can be changed to display either standard or metric units of
measurement.
TIP
To exit the set-up mode at any time, wait 10 seconds. The display
automatically exits and returns to the odometer display.
MEASUREMENT STANDARD METRIC
Distance Miles Kilometers
Fuel U.S. Gallons Liters, Imperial Gallons
Temperature Fahrenheit Celsius
Time 12–Hour Clock 24–Hour Clock
To change the display units, do the following:
1. Turn the key to the OFF position.
2. Press and hold the MODE button while turning the key to the ON position.
3. When the display flashes the distance setting, tap the MODE button to
advance to the desired setting.
4. Press and hold the MODE button to save the setting and advance to the next
display option.
5. Repeat the procedure to change remaining display settings.
CLOCK MODE
TIP
The clock must be reset any time the battery has been disconnected or
discharged.
To set the clock time, do the following:
1. Turn the key to the ON position. Use the MODE button to toggle to the
odometer display.
2. Press and hold the MODE button until the hour segment flashes. Release
the button.
46
FEATURES AND CONTROLS
To Next Page
Loading...
Need help?
General
