PRE-RIDE INSPECTION
Failure to inspect and verify that the vehicle is in safe operating condition before
operating increases the risk of an accident. Always inspect the vehicle before
each use to make sure it's in safe operating condition.
ITEM REMARKS PAGE
Brake system/pedal travel Ensure proper operation page 48
page 85
Brake fluid Ensure proper level page 85
Front suspension Inspect, lubricate if necessary page 80
Rear suspension Inspect, lubricate if necessary page 80
Steering Ensure free operation page 47
Tires Inspect condition and pressure page 88
Wheels/fasteners Inspect, ensure fastener tightness page 88
Frame nuts, bolts,
fasteners
Inspect, ensure tightness
-
Accelerator Ensure proper operation
-
Headlamps Check operation, apply POLARIS
dielectric grease when lamp is replaced
page 90
Brake light/tail lamps Check operation
-
Seat Latch Push down on the seat back to ensure the
latch is secure
-
Seat Belt Check length of belt for damage, check
latches for proper operation
page 49
Batteries Ensure full charges, proper water levels,
clean terminals
page 41
Battery cables Inspect for proper cable routing and
secure connections
page 41
Grass and Leaves Remove grass, leaves, foreign matter,
and other flammable material or debris,
especially near the drive system.
page 31
52
OPERATION
To Next Page
Loading...
