54
OPERATION
Active Descent Control (ADC) System (if equipped)
The ADC system allows engine braking to all four wheels when
the vehicle descends a hill or incline.
• Always operate in low gear and engage ADC 4X4 when
transporting heavy loads and/or when towing.
• Always operate in low gear and engage ADC 4X4 before
ascending or descending a hill.
Engaging Active Descent Control
The ADC switch has two positions (ON/OFF). ADC will
activate when all of the following conditions are met:
• AWD mode is engaged.
• No throttle applied.
• Vehicle speed is between 1-12.5 MPH.
ADC switch is in ON position.
Disengaging Active Descent Control
The ADC system will automatically disengage if at least one of
the following conditions occur:
• ADC Switch has been turned off.
The transmission is shifted to neutral or park.
To Next Page
Loading...
Need help?
General
