84
MAINTENANCE
Suspension Adjustments
The front and rear suspensions can be adjusted to provide a stiffer suspension, if necessary.
1. Remove the top shock mounting bolts from the inside mounting positions.
2. Reposition the shocks to the outside mounting holes.
3. Reinstall the shock mounting bolts. Torque to 40 ft-lbs (54.2 Nm).
Spring Adjustment
Adjust the front and rear shock absorber springs by
rotating the adjustment cam either clockwise or counter-
clockwise to increase or decrease spring tension.
Inside Mounting
Position
Rear Suspension Shown
Adjustment is similar for Front Suspension
Outside Mounting Position
To Next Page
Loading...
Need help?
General
