26
FEATURES AND CONTROLS
Switches
Ignition Switch
The ignition switch is a three-position, key-
operated switch. The key can be removed from
the switch when it is in the OFF position.
Cab Heater Switches
To operate the cab heater, rotate the fan control
to the desired fan speed setting. The far left
setting turns the fan off.
Adjust the temperature by rotating the
temperature control to the desired heat setting.
Rotate the control clockwise to increase heat or
counter-clockwise to decrease heat.
Auxiliary Outlets
The 12-volt receptacles have spade connections
on the back that may be used to power an
auxiliary light or other optional accessories or
lights. The connections are behind the console,
under the dash.
OFF The engine is off. Electrical circuits are
off, except Acc, 12V.
ON Electrical circuits are on. Electrical
equipment can be used.
START Turn the key to the START position to
engage the electric starter. The key
returns to the ON position when
released.
Ignition Switch
Temperature
Control
Fan Control
12V Auxiliary
Outlets
To Next Page
Loading...
