41
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condition before operating
increases the risk of an accident. Always inspect the vehicle before each use to make sure it’s
in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 28
82
Brake fluid Ensure proper level 82
Front suspension Inspect, lubricate if necessary 67
Rear suspension Inspect, lubricate if necessary 67
Steering Ensure free operation 83
Tires Inspect condition and pressure 85
Wheels/fasteners Inspect, ensure fastener tightness 85
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 36
68
Coolant level Ensure proper level 74
Coolant hoses Inspect for leaks -
Throttle Pedal Ensure proper operation -
Indicator lights/switches Ensure operation 23
Intake Screens (2) Inspect, clean 80
Spark arrester Inspect and clean as needed, replace if damaged 81
Air filter Inspect, clean 80
Headlamp Verify proper operation
Brake light/tail lamp Verify proper operation
Seat Belts Check length of belt for damage, check latches for
proper operation
31
Doors Check for wear or damage, ensure proper installation 30
Alternator Belt Check for wear and damage
AC Hoses Check for wear or damage
Fresh Air Filter Inspect, clean
To Next Page
Loading...
