32
FEATURES AND CONTROLS
Rear Window Panel (if equipped)
Window Removal
1. Rotate the upper window latches
counter-clockwise to release the locks.
2. Tilt the upper edge of the window
slightly outward and free the lower
window brackets from the frame, then
carefully lift the window up and away
from the vehicle.
3. Secure the upper window latches.
4. To prevent damage to the window
during storage, store it in an upright
position in a secure area. Place the
lower frame of the window on wood or
another semi-soft surface.
Window Installation
1. Rotate the upper window latches
counter-clockwise to release the locks.
2. From the rear of the cab, place the lower edge of the window into the window opening,
hooking the lower window brackets over the frame of the vehicle inside the cab.
3. Align the upper edge of the window to the window opening.
4. Secure the upper window latches.
To Next Page
Loading...
Need help?
General
