40
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condition before operating
increases the risk of an accident. Always inspect the vehicle before each use to make sure it’s
in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 26
80
Brake fluid Ensure proper level 80
Front suspension Inspect, lubricate if necessary 66
Rear suspension Inspect, lubricate if necessary 66
Steering Ensure free operation 81
Tires Inspect condition and pressure 83
Wheels/fasteners Inspect, ensure fastener tightness 83
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 34
67
Coolant level Ensure proper level 73
Coolant hoses Inspect for leaks -
Throttle Pedal Ensure proper operation -
Indicator lights/switches Ensure operation 24
Intake Screens (2) Inspect, clean 78
Air filter Inspect, clean 78
Headlamp Verify proper operation
Brake light/tail lamp Verify proper operation
Seat Belts Check length of belt for damage, check latches for
proper operation
30
Cab Nets/Doors Check for wear or damage, ensure proper installation 29
To Next Page
Loading...
Need help?
General
