EasyManuals Logo

Polaris RMK Shift User Manual

Polaris RMK Shift
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #79 background image
76
MAINTENANCE
Lubrication
Driveshaft Bearing
Inject grease into the fitting on the speed-
ometer sensor housing until grease purges
from the seal on the inside of the tunnel.
This should take approximately two
pumps. Do not use more than four pumps.
Throttle Cable
Lubricate the throttle cable lightly
with grease or oil. With the
engine off, turn the handlebars to
the left and lubricate liberally as
shown.
Choke and Choke Cable
Lubricate the choke slide and
cables lightly with oil or grease.
Before turning the engine off,
operate the choke intermittently to
draw moisture out of the choke
plunger area and reduce the possi-
bility of the choke becoming fro-
zen.
Fitting

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris RMK Shift and is the answer not in the manual?

Polaris RMK Shift Specifications

General IconGeneral
Engine Type2-Stroke
Cylinders2
CoolingLiquid
Track Width15 in
Fuel Capacity11.5 gal
Rear SuspensionRMKĀ®
BrakeHydraulic
Oil Capacity3.5 qt
EngineCleanfire

Related product manuals