113
MAINTENANCE
Suspension Settings (RZR)
The front and rear suspensions are preload adjustable, with five settings
on each axle.
The suspensions are set on the lowest setting at the factory. This setting
is appropriate for nearly all riding conditions.
If desired, the suspension may be adjusted to maintain vehicle clearance
height when carrying loads. Your POLARIS dealer can provide the tool
required to make suspension adjustments. Elevate the vehicle slightly
for easier adjustment.
Always heed the following rules if you make adjustments to this
suspension.
• Always return the suspension to the lowest setting after the load is
removed from the vehicle. The increased suspension height will
negatively impact vehicle stability when operating without a load.
• Always apply the same adjustment setting to all four wheels.
• Never operate the vehicle on the highest or second highest preload
settings without a total combined payload in the vehicle of 450 lbs.
(204 kg) or more. Payload includes the driver, passenger, POLARIS-
approved accessories and cargo. Never exceed the stated load
capacity for this vehicle. See page 132.
Adjustment
Cam
Lowest
(Softest)
Setting
Highest
(Stiffest)
Setting
To Next Page
Loading...
