WHEEL REMOVAL
1. Position the vehicle on a level surface.
2. Place the transmission in PARK. Stop the engine.
3. Engage the park brake.
4. Loosen the wheel nuts slightly.
5. Elevate the side of the vehicle by placing a suitable stand under the frame.
6. Remove the wheel lug nuts. Remove the wheel.
WHEEL INSTALLATION
WARNING
Improperly installed wheels can adversely affect tire wear and vehicle
handling, which can result in serious injury or death. Always ensure that all
nuts are torqued to specification. Do not service axle nuts that have a cotter pin
installed. Your POLARIS dealer can assist.
1. Place the transmission in PARK.
2. Place the wheel in the correct
position on the wheel hub. Be sure
the valve stem
q
is toward the
outside and rotation arrows on the
tire point toward forward rotation.
3. Attach the wheel nuts and finger
tighten.
4. Carefully lower the vehicle to the
ground.
5. Torque the wheel nuts to
specification. See the Axle and
Wheel Nut Torque Specifications
section for details.
Right Rear Wheel
(type varies by model)
164
MAINTENANCE
To Next Page
Loading...
Need help?
General
