ROLLOVER PROTECTIVE STRUCTURE (ROPS)
The Rollover Protective Structure (ROPS) on
this vehicle meets ISO 3471 rollover
performance requirements. Always have your
authorized dealer thoroughly inspect the
ROPS if it ever becomes damaged in any
way.
q
ROPS Label (on ROPS or pass. hip bar)
WARNING
Never make modifications to the vehicle’s ROPS structure.
No device can assure occupant protection in the event of a rollover. When used
with seat belts and cab nets or doors, the ROPS helps prevent occupants from
being ejected from the vehicle. Always follow all safe operating practices
outlined in this manual to avoid vehicle rollover.
WARNING
Vehicle rollover could cause severe injury or death. Always avoid operating in
a manner that could result in vehicle rollover.
HOOD
Remove the hood to access the radiator pressure cap
w
and coolant overflow
bottle
e
.
1. Turn the hood fasteners
q
1/4 turn.
2. Grasp the upper hood edge and pull upward to disengage the fasteners.
3. Pivot the hood forward and lift upward to disengage the lower hood hooks.
4. Lift the hood away from the vehicle.
39
FEATURES AND CONTROLS
To Next Page
Loading...
Need help?
General
