DISENGAGING AWD
Move the AWD switch to the center or bottom position to disengage AWD. If the
switch is turned off while the front hubs are driving, they will not release until the
rear wheels regain traction.
In some situations, the front gearcase may remain locked after turning the AWD
switch off. If this occurs, you may notice increased steering effort and some
vehicle speed restriction. Perform the following procedure to unlock the front
gearcase.
1. Stop the vehicle.
2. Operate in reverse for at least 10 ft (3 m).
3. Stop completely.
4. Shift into low gear and drive forward.
5. If the front gearcase remains locked after following these instructions, see
your dealer for service.
48
FEATURES AND CONTROLS
To Next Page
Loading...
Need help?
General
