120
MAINTENANCE
Battery
Improperly connecting or disconnecting battery cables can result in an explosion
and cause serious injury or death. When removing the battery, always
disconnect the negative (black) cable first. When reinstalling the battery, always
connect the negative (black) cable last.
Your vehicle has a maintenance-free battery. Always keep battery
terminals and connections free of corrosion. If cleaning is necessary,
remove the corrosion with a stiff wire brush. Wash with a solution of
one tablespoon baking soda and one cup water. Rinse well with tap
water and dry off with clean shop towels. Coat the terminals with
dielectric grease or petroleum jelly.
Battery Removal
1. Remove the driver’s seat (XP) or the left rear passenger seat (XP 4).
See page 28.
2. Disconnect the black (negative) battery cable first.
3. Disconnect the red (positive) battery cable last.
4. Remove the battery hold-down strap.
5. Lift the battery out of the vehicle.
To Next Page
Loading...
