50
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating
condition before operating increases the risk of an accident. Always
inspect the vehicle before each use to make sure it's in safe operating
condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 37
108
Brake pads Inspect, replace if damaged 109
Brake fluid Ensure proper level 110
Front suspension Inspect, lubricate if necessary 84
Rear suspension Inspect, lubricate if necessary 84
Steering Ensure free operation 120
Tires Inspect condition and pressure 12
115
Wheels/fasteners Inspect, ensure fastener tightness 115
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 42
87
Coolant level Ensure proper level 98-99
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation -
Indicator lights/switches Ensure proper operation 26-27
Headlights Check operation -
Brake light/taillight Check operation -
Seat latches Push down on both seat backs to
ensure the latches are secure
28
Seat belts Check length of belt for damage,
check latches for proper operation
32
Cab doors Check doors and latches for wear or
damage.
35
Spark arrester Inspect and clean as needed, replace
if damaged
106
To Next Page
Loading...
Need help?
General
