54
FEATURES AND CONTROLS
Instrument Cluster
Indicator Lamps
Lamp Indicates Condition
1 Check Engine This indicator appears if an EFI related fault occurs.
Do not operate the vehicle if this warning appears.
Serious engine damage could result. Your autho-
rized POLARIS dealer can assist.
2EPS Warning
(if equipped)
This indicator illuminates when a fault has occurred
in the EPS system. Your authorized POLARIS
dealer can assist. EPS operation is possible with
key on/engine off for up to 5 minutes.
3 Engine Hot This lamp illuminates to indicate an overheated
engine. If the indicator flashes, a severe overheating
condition exists.
4 Neutral This lamp when the transmission is in neutral and
the ignition key is on the ON position.
5 Helmet/Seat Belt This lamp flashes for several seconds when the key
is turned to the ON position. The lamp is a reminder
to wear helmet and seat belt before operating.
6 High Beam This lamp illuminates when the headlamp switch is
set to high beam.
7 Chassis Fault Not applicable.
8 Performance
Limited
Not applicable.
To Next Page
Loading...
Need help?
General
