43
FEATURES AND CONTROLS
All Wheel Drive System
4WDC AWD Mode (if equipped)
Move the momentary switch to the right,
past the AWD setting, to engage 4WDC (if
equipped). When the switch is on 4WDC,
the ADC system allows engine braking to
all four wheels when the vehicle descends a
hill or incline. Always move the 4X4
switch to 4WDC before ascending or descending a hill.
Four-Wheel Descent Control (4WDC) System
The 4WDC system allows engine braking to all four wheels when the
vehicle descends a hill or incline. Always move the 4X4 switch to
4WDC before ascending or descending a hill.
Engaging Four-Wheel Descent Control
The 4WDC system will automatically engage when all four of the
following conditions occur:
• The 4X4 switch must be in the 4WDC position
• The throttle must be closed (throttle lever released)
• The transmission must be in gear (high, low or reverse)
Disengaging Four-Wheel Descent Control
The 4WDC system will automatically disengage if at least one of the
following conditions occur:
• The 4X4 switch is moved out of the 4WDC position
• The throttle is open (throttle is applied)
• The transmission is shifted to neutral or park
• The vehicle is on flat ground, or not actively descending a hill
To Next Page
Loading...
Need help?
General
