105
AUDIO SYSTEM
Selecting Audio Sources
FM/AM/MW/LW Tuning
Memory Presets
The audio system features 15 user-defined presets for each tuner source for storing favorite
stations.
1. To set a preset, press MODE
repeatedly until the desired source is active (FM, AM, MW,
LW).
2. Use TUNE+ or TUNE- to locate a radio station.
3. Press and hold PRESET.
4. Press TUNE+ or TUNE- to select an available
preset location (P1, P2, P3, etc.). The preset
location displays on the screen.
Tip: Saving a radio station without picking a location will
save the station in the next available location. The initial
position is the first unassigned preset location.
5. When the desired location is displayed, press
PRESET. The station will be stored.
Tip: If the desired preset location already contains a stored
radio station, it will be overwritten by the new selection.
6. Press PRESET repeatedly to scroll through the list
of stored radio presets.
To Next Page
Loading...
Need help?
General
