Fuel Gauge Display
q
- The segments of the fuel gauge show the level of fuel
in the fuel tank. When the last segment clears, a low fuel warning is activated. All
segments including the fuel icon will flash. Refuel immediately
TIP
If the fuel icon fails to display, an open or short circuit has occurred in the fuel
sensor circuit. Your dealer can inspect the vehicle and perform service.
Information Display
w
- This area displays odometer, trip meters (2), air
temperature and fuel economy.
Clock Display
e
- The clock displays time in a 12-hour or 24-hour format. See
page 28 for resetting instructions.
DISPLAY UNITS (STANDARD/METRIC)
The display can be changed to display either standard or metric units of
measurement.
NOTE
To exit the set-up mode at any time, wait 10 seconds. The display
automatically exits and returns to the odometer display.
STANDARD
DISPLAY
METRIC DISPLAY
Distance Miles Kilometers
Fuel U.S. Gallons I = Imperial Gallons Liter = Liters
Temperature Fahrenheit Celsius
Time 12-Hour Clock 24-Hour Clock
1. Turn the key to the OFF position.
2. Press and hold the mode button while turning the key to the ON or ACC
position.
3. When the display flashes the distance setting, tap the mode button to
advance to the desired setting.
4. Press and hold the mode button to save the setting and advance to the next
display option.
5. Repeat the procedure to change remaining display settings.
28
FEATURES AND CONTROLS
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
