115
MAINTENANCE
Side Panel Removal
1. Remove the seat. See page
114.
2. Use a flat screwdriver to
remove the plastic rivets
securing the side panel.
3. Grasp the rear of the side
panel near the rear cab. With a
firm motion, pull the side
panel outward to disengage
the side panel from the grom-
mets.
4. Pull the panel outward and
rearward to remove it.
Footwell Removal (1-Up Models)
1. Remove the four screws on
the bottom of the footwell.
2. Use a flat screwdriver to
remove the plastic rivets
securing the footwell to the
fenders.
3. Remove the footwell.
Step 2
Step 3
Torx Head
Screws
Plastic Rivets
To Next Page
Loading...
