Polaris ToyotaLUXX Installation Manual

1300 555 514 11
Special Vehicle Notes: Radio Recepon for Toyota vehicles
with a standard radio connecon
For all Toyota vehicles that use the older style one pin Radio Antenna plug, you will need to aach
either the Antenna control wire or the Amp Control wire (from the Luxx power loom) to the
Antenna Control wire on the Toyota OEM plug:
Aach the amp control wire from the Luxx harness to the wire
coming from this pin.
Or
Cut the blue wire from the Radio Antenna adaptor on the Luxx
harness and aach to the wire coming from this pin
Mounng the unit
 The Toyota double din chassis will aach to most vehicle’s OEM brackets*.
 Before pung your dash back together it is best to aach the screen and test all
funcons.
 Some vehicles will require a fascia to ll the gap around the Toyota double din
chassis.
 Do not forget to remove the transportaon screws before installing
*Some OEM brackets may have to be modied in order to line the brackets up
on the Toyotaluxx. For example, the 79 series brackets need to be led down you
(see below):
File down the parts
highlighted in red

Polaris ToyotaLUXX Specifications

General

Brand	Polaris
Model	ToyotaLUXX
Category	Car Navigation system
Language	English