Why is there noise in the drive system of my Polaris Offroad Vehicle?
Noise in the drive system of your Polaris Offroad Vehicle can be caused by: * Drive belt surface flat spots: Inspect and replace as needed. * Drive chain loose: Inspect and adjust (or replace).
What to do if my Polaris Offroad Vehicle engine requires more than normal pulls to start?
If your Polaris Offroad Vehicle engine requires more than normal pulls to start, it could be due to: * Poor fuel: Replace with fresh winter fuel.
What causes front end push on my Polaris Trail Touring Offroad Vehicle?
Front end push on your Polaris Offroad Vehicle can be caused by: * Check for worn skags * Check for binding suspension shafts and grease all pivot points * Increase IFS spring preload by adjusting cam or threaded adjuster * Adjust RRSS to a higher position
Why does my Polaris Trail Touring Offroad Vehicle belt wear or burn?
Belt wear or burn in your Polaris Offroad Vehicle can occur due to several reasons: * Driving at low RPMs. A solution is to drive at higher RPMs, gear the machine down, and check belt deflection. * Insufficient warm-up. You should warm the engine for at least five minutes. In extremely cold weather, remove the drive belt and warm it up, also break the machine loose from the snow. * Towing at low RPM. Avoid towing in deep snow and use fast, aggressive throttle to engage the clutch. * Riding with high RPM and slow speed. You should lower the gear ratio, reduce RPM, and avoid riding in high ambient temperatures. Check for snow ingestion. * Ice and snow build-up between the track and tunnel. Warm the engine for at least five minutes. In extremely cold weather, remove the drive belt ...
General| Brand | Polaris |
|---|---|
| Model | Trail Touring |
| Category | Offroad Vehicle |
| Language | English |
Record crucial identification numbers for your snowmobile for reference and registration purposes.
Discusses Polaris' commitment to environmental protection, noise levels, and air pollution.
Covers fundamental safety rules, signal words, and general operator responsibilities.
Details safety precautions regarding moving parts like the track and engine.
Emphasizes the importance of proper riding apparel, helmets, and eye protection.
Addresses safe operation concerning speed, visibility, terrain, and environmental factors.
Explains the location and meaning of safety decals on the snowmobile.
Illustrates and lists the main controls and components of the snowmobile.
Guides on adjusting front and rear suspension for optimal riding performance and comfort.
Discusses the use and importance of traction products like studs and carbide skags.
Provides a comprehensive list of items to inspect before operating the snowmobile.
Details essential checks for the engine, brakes, steering, and other systems before starting.
Step-by-step instructions for starting the engine and the critical break-in process.
Covers fuel handling, recommendations, and engine oil system checks and maintenance.
Explains carburetor adjustments and jetting guidelines for optimal performance.
Details safe driving practices, emergency stopping methods, and electronic reverse operation.
Outlines the recommended maintenance program and interval table for upkeep.
Guides on lubricating suspension, steering, and checking essential fluid levels.
Covers maintenance for spark plugs, filters, fuel system, and carburetor.
Details maintenance for drive chain, brakes, clutch, and drive belts.
Covers track tension/alignment, steering system, and battery care.
Provides instructions for preparing the snowmobile for extended storage.
Addresses common engine problems, probable causes, and solutions.
Helps diagnose and resolve issues related to the snowmobile's suspension.
Guides on diagnosing and resolving problems related to the drive belt.
Explains how to obtain service and warranty support from Polaris.
Details the coverage, limitations, and exclusions of the Polaris warranty.
To Next Page