98
MAINTENANCE AND LUBRICATION
Cleaning and Storage
Washing the Veh icle
If a high pressure water system is used for cleaning (not
recommended), exercise extreme caution. The water may damage
components and could remove paint and decals. Avoid directing the
water stream at the following items:
S Wheel bearings
S Radiator
S Transmission seals
S Brakes
S Cab and body panels
S Labels and decals
NOTE: If warning and safety labels are damaged, contact your
Polaris dealer for free replacement.
Grease all zerk fittings immediately after washing. Allow the engine to
run for a while to evaporate any water that may have entered the engine
or exhaust system.
Polishing the Vehicle
Polaris recommends the use of common household aerosol furniture
polish for polishing the finish on your P olaris vehicle. Follow the
instructions on the container.
Polishing Tips
S Avoid the use of automotive products, some of which can scratch the
finish of your vehicle.
S Always use clean cloths and pads for cleaning and polishing. Old or
reused cloths and pads may contain dirt particles that will scratch the
finish.
To Next Page
Loading...
Need help?
General
