113
MAINTENANCE AND LUBRICATION
Minor Maintenance
Steering Cable Inspectio n
1. The handlebars and steering nozzle should operate smoothly. If
movement is stiff have your authorized Polaris dealer service it.
2. Turn the handlebars from lock to lock and check to be sure that the
clearances between the steering nozzle and the rear hull are even on
both sides. If the alignment is not even, have your authorized
Polaris dealer service it.
Throttle Cable Insp ection
1. Depress and release the throttle lever. It should return to its initial
position smoothly. If it does not, have your authorized Polaris
dealer service it.
2. Throttle lever free-play should not exceed .020″-.060″ (.5-1.5 mm).
If it does, have it corrected by your authorized P olaris dealer.
.020-.060″ (.5-1.5
mm)
.020-.060″ (.5-1.5 mm)
OR
To Next Page
Loading...
Need help?
General
