Polaris Virage TX 2000 Service Manual

42 . Apply anti-seize to threads of spark plugs, install and
torque to specification.
ENGINE
Assembly - Polaris Engines
43 . Press a new seal into starter housing from inside to
outside until outer seal flange bottoms on cover. The
seal lip and spring face inward (toward crankshaft).
44.Apply grease to lip of seal and a light film on
crankshaft.
45 . Before installing cover, apply a thin film of 3 Bond
1215 to sealing surface and remove any hardened
sealer from crankcase parting line.
3 Bond 1215-
PN2871S5?
■?iiAie,
46 . Install starter housing cover. Torque all bolts (4) to
specification.
Starter Housing Cover Torque -
22 ft. lbs (30-4 Mm)
Polaris Sales Inc.
4.35
3/00

Polaris Virage TX 2000 Specifications

General

Manufacturer	Polaris
Model	Virage TX 2000
Engine Type	2-Stroke
Horsepower	95 HP
Width	48 inches
Seating Capacity	3 persons
Category	Personal Watercraft
Color Options	Red, Blue