Impeller Removal Tool
has 3 knurled sections
Coupler Tool Has 2
Knurled Sections
Impeller Tool Diameter:
.852² (21.65mm)
Coupler Tool Diameter:
.787² (20 mm)
Final Drive / Propulsion
5.18
Stator Disassembly -- Continued
2. Mount stub shaft flat surfaces in a vise to prevent the
impeller and stator from rotating.
3. IInstall impeller removal tool and turn
counterclockwise to remove. The impeller removal
tool can be identified by (3) knurled sections on the
shaft.
Impeller Removal Tool
PN 2871036
To Next Page
Loading...