Polaroid Digital Photo Picture Frame User Manual

3
Quick Start
Quick Start Instructions
1. Plug the AC adapter into the Digital Photo Picture Frame and plug it into a wall outlet.
2. Insert a memory card into the slot or insert peripheral USB equipment into USB host:
Memory Card Slot: Secure Digital™, MultiMedia Card™, Memory Stick™, Memory Stick
Duo™
3. Turn on the Power Switch on the back of the Digital Photo Picture Frame.
4. Once the Digital Photo Picture Frame has been turned on, the unit will enter the “Select
Card” page automatically.
5. Press the or button to select one type of memory cards and press the Play ▶II button
to enter “Select Mode” page.
6. Press the or button to select one mode and press the Play ▶II button to enter.
7. Or press the EXIT button to back to the “Select Card” page.
8. Follow step 6, press the or button to select one picture and press the Play ▶II button
to view it in full screen. Then press the button to next picture or press the button to
previous picture. Press the EXIT button to exit.
9. When viewing a picture, press the Play ▶II button again to enlarge the current picture.
Under zoom in state, press the button to move to the right side of the picture and press
the button to move to the left side. Press the EXIT button to zoom out the picture to
original size.
10. Press the EXIT button for one second to access the on screen display (OSD). Press the
or button to choose one item and press the Play ▶II button to enter. Press the or
button to choose one option and press the Play ▶II button to conrm your choice. Press the
EXIT button to exit the OSD.

Polaroid Digital Photo Picture Frame Specifications

Display

screen size	7 inches
display resolution	480 X 234 pixels

Input Formats

secure digital	Supported
multi media card	Supported
compact flash	Supported