Polaroid FLM-2011

耋晤憮
22
Blue screen setting
Zoom mode adjustment
Backlight adjustment
Access the System Setting menu.
Press CH5/6to select blue screen
item.
Press VOL+/- to select off or on.
If you select on, the screen displays blue background when there is
no signal. If you select off, the screen displays static when there is
no signal.
Note: Only when the blue screen is on, the set will turn off
automatically after 15 minutes if there is no signal.
Press CH5/6to select zoom mode
item.
Press VOL+/- to select between fill
all or wide.
You can also press ZOOM button on the remote control to select the
zoom mode.
System setting
blue screen
on
- - - -
zoom mode
fill all
CC 1
ccd mode settings
parental control settings
backlight
6
NOTE:
Under the YPbPr or VGA mode, the ZOOM button is not active.
1
2
3
Access the System Setting menu.
1
2
3
blue screen
on
- - - -
zoom mode
fill all
CC 1
ccd mode settings
parental control settings
backlight
6
Press CH5/6to select backlight
item.
Press VOL+/- to adjust the backlight
brightness.
Access the System Setting menu.
1
2
3
blue screen
on
- - - -
zoom mode
fill all
CC 1
ccd mode settings
parental control settings
backlight
6
Operations (continued)
CLK