16 I
GB
PROGRAM TABLE tab by pressing the
Down movement button in Main Menu and
confirm your selection with the OK button.
Program Table menu will be displayed.
6.4.4.1-Switching the locations of the
stored channels
6.4.4.3-Skipping a stored channel
In the event that you do not wish to see
certain programs while navigating through
the channels using the PR+/PR- buttons,
then you can use this function.
Select the program that will be
hidden by pressing the up/down
or right/left movement buttons.
“Press the “RED” button. The name of the
program to be skipped shall appear in red.
You may perform this procedure for more
than one program. To view the skipped
program, directly enter the program number
using the numeric buttons. To cancel the
program skipping process, press again the
“RED” button. After setting is complete,
press the EXIT button to exit the menu.
6.4.4.4-To name the channels
You can assign your program or programs
of choice the names that have a maximum
of five characters. Select the program
you would like to name from the
Program Table by pressing the
up/down or right/left movement
buttons. “Press the “YELLOW”
button. An empty space appears
beside the channel for which you
would like to specify name information.
Here, choose the desired letter, number
or sign using the up/down movement
buttons. For the second character, press
the right movement button and then select
the desired letter, number or sign again
with the up/down movement buttons. After
entering all the characters, store the name
you have written in the memory by pressing
the “YELLOW” button. To write names for
any of the other programs, simply repeat
the above procedure. If you want to exit the
menu, simply press the EXIT button. If the
program is not named, then the channel
number of that program will be displayed
automatically.
PROGRAM TABLE
00
01 Channel
02 Channel
03
04
05
06
07
08
09
10
11
12
13
14
SKIP
MOVE
NAME
DELETE
SELECT
BACK
Select the program you would like to
relocate by pressing the Up/Down or Left/
Right movement buttons. “Press
the “GREEN” button. Green will
blink. Move to the other program
you would like to relocate by
pressing the up/down or Right/
left movement buttons. “Finish
the relocation process by pressing
the “GREEN” button. The channel
in the first program number you
selected has been moved to your
second selected program number
and the channels between both
program numbers have been shifted
to the initially selected program
number. After setting is complete, press the
EXIT button to exit the menu.
6.4.4.2-Deleting a stored channel
Select the program you would like to delete
by pressing the up/down or right/left
movement buttons. “Press the
“BLUE” button. The blue button
on the menu will blink for approval.
“You may perform the deletion
process by pressing the “BLUE”
button or you may abort the
deletion process by pressing the MENU
button. “Once you pres the “BLUE” button,
the selected program is deleted and the
following channels are transferred to after
this program number. After setting is
complete, press the EXIT button to exit the
menu.
To Next Page
Loading...
