Need help?Do you have a question about the Polaroid Hi-Print and is the answer not in the manual?
Charge the printer via USB and pair it with your phone using Bluetooth.
Use the Polaroid Hi-Print app to print your first photo following the instructions.
Red blinking Power LED indicates no cartridge is inserted. Insert a new cartridge.
Turn the printer off and on to clear jams. Contact support if the issue persists.
Ensure the printer is charged, then press the reset button with a fine, sharp object.
Use the free app to print fade-proof photographs from your phone.
Device complies with FCC rules, Part 15, with specific operational conditions.
Equipment meets FCC RF exposure limits for uncontrolled environments, requiring 20cm separation.
Charge the printer via USB and pair it with your phone using Bluetooth.
Use the Polaroid Hi-Print app to print your first photo following the instructions.
Red blinking Power LED indicates no cartridge is inserted. Insert a new cartridge.
Turn the printer off and on to clear jams. Contact support if the issue persists.
Ensure the printer is charged, then press the reset button with a fine, sharp object.
Use the free app to print fade-proof photographs from your phone.
Device complies with FCC rules, Part 15, with specific operational conditions.
Equipment meets FCC RF exposure limits for uncontrolled environments, requiring 20cm separation.
General| Printing Technology | Dye-sublimation |
|---|---|
| Print Size | 2x3 inches |
| Connectivity | Bluetooth |
| Compatibility | iOS and Android devices |
| Paper Type | Polaroid Hi-Print 2x3 paper cartridge |
| Connectivity Options | Bluetooth 4.0 |
| Battery | Lithium-ion, rechargeable |
| Print Speed | Approximately 50 seconds per print |
| Weight | 255 grams |
| Battery Life | 20 prints per charge |
| Dimensions | 175 x 101 x 46 mm |
To Next Page
