Let's get started
We'll guide you through attaching and using your Polaroid Insta-Share Printer Moto Mod™.
In this guide:
• “Attach and remove your Moto Mod”
• “Charge your Insta-Share Printer”
• “Load paper into your Insta-Share Printer”
• “Take a photo”
• “Print your photo”
• “Print a saved photo”
• “Print a photo from another app”
• “Peel and stick your photo”
• “Want more?”
Attach and remove your Moto Mod
Align the sides of your phone with the sides of the Moto Mod until they snap together.
When connected, you will feel a vibration, see a message on your screen and hear
asound.
Note: make sure your phone's camera lens aligns with the hole in the Insta-Share Printer
and the connectors are clean and dry. Also, remove your phone case if you use one.
To remove your Insta-Share Printer, lift up from the bottom pick out area.
Caution: do not remove your Insta-Share Printer by pushing the phone's camera lens,
asthat could damage your phone.
INSTA-SHARE
PRINTER
1
MD100I
To Next Page
Need help?
General
