English
Getting Started
1. Attach the camera’s hand strap as shown in the
illustration.
2. Open the battery/SD card door.
3. Insert the battery with tab uppermost as shown in the
illustration.
4. Insert an SD/SDHC memory card (Optional).
The camera has 16MB internal memory (4
MB available
for image storage)
, but you can load an SD/SDHC
memory card (We recommend the use of a Polaroid SD
card - purchased separately - up to 4GB) to expand the
camera’s memory capacity.
Be sure to format the memory card with this camera
before its initial usage.
5. Close the battery/SD card door and make sure it is locked
securely.
Charging the Battery
1. Insert one end of the AC power adapter into the DC IN 9V terminal of the camera.
2. Insert the other end of the AC power adapter
into a wall outlet.
The status LED is orange when charging
and is green when charging is complete.
Fully charge battery before first use
(approximately 2 hours).
To Next Page
Loading...
Need help?
General
